P0A80
P0A80: Replace Hybrid Battery Pack
P0A80 means the hybrid control system has judged the high-voltage battery pack to be outside its acceptable condition limits. The code name says "replace hybrid battery pack", but the code alone does not prove the whole pack must be replaced.
Safety first
- Do not touch, unplug or cut orange high-voltage cables, and do not open high-voltage components or covers.
- Follow the warning messages on your dashboard and the guidance in your owner’s manual. Some vehicles limit or prevent driving when this fault is present.
- If you see smoke, smell burning, or the vehicle has been flooded or in a collision, move away from the vehicle and contact emergency services or roadside assistance.
- Have the vehicle diagnosed by a technician trained and equipped for high-voltage work. Clearing the code does not fix the underlying cause.
What P0A80 means
- The hybrid system monitors the high-voltage battery and compares sections of the pack with each other. P0A80 is set when it decides the pack condition is outside the limits the manufacturer has programmed.
- Toyota has published a service bulletin linking P0A80 on some models to dust or debris affecting the hybrid battery, so the cause is worth confirming before a replacement is agreed.
Which vehicles it applies to
- P0A80 is a generic OBD-II code name, most often reported on hybrid vehicles.
- The Toyota bulletin listed below covers certain Toyota hybrid models. Check the bulletin for the exact models and years.
- Check for open recalls on your vehicle by entering its VIN on the NHTSA recalls site. A recall repair is carried out free by the manufacturer’s dealers.
Possible causes
- Ageing or deterioration of sections of the high-voltage battery
- Restricted battery cooling, for example dust or debris, as described in the Toyota bulletin
- A fault in the battery monitoring or its wiring
Not ranked. A technician needs to follow the manufacturer procedure to tell these apart.
Repair cost
- We do not publish a cost estimate for this code. The cost depends on what a proper diagnosis finds.
Get a free diagnosis for your vehicle
Tell ElectraMedic your make, model and symptoms and get guidance on what P0A80 could mean for your car.
Start free diagnosisAlready have a repair quote?
If you have been quoted for a new hybrid battery, Repair Clarity can explain the quote and suggest questions to ask, such as whether battery cooling was checked first. $29.99 USD one-off.
Sources and review
- SAE J2012: Diagnostic Trouble Code Definitions
- Toyota service bulletin (NHTSA file MC-10164333): MIL on with DTC P0A80 or P0A7F due to dust or debris
- NHTSA research report: Safety Management of Automotive Rechargeable Energy Storage Systems (discusses P0A80)
- NHTSA: Check for recalls by VIN
Not yet reviewed. Drafted from the listed documents. Not yet reviewed by a high-voltage technician.
General information only, not a diagnosis of your vehicle. Always follow your manufacturer's guidance.