EV DTC Library

P0AA6

P0AA6: Hybrid/EV Battery Voltage System Isolation Fault

P0AA6 means the vehicle has detected that the high-voltage (HV) battery system may no longer be electrically isolated from the vehicle body. In other words, there may be an unintended path for high voltage to reach the chassis.

Safety first

  • Treat P0AA6 as a safety-related fault, not just a performance problem.
  • Do not touch, unplug or cut orange high-voltage cables, and do not open high-voltage components.
  • Follow the warning messages on your dashboard and the guidance in your owner’s manual. Some vehicles limit or prevent driving when this fault is present.
  • If you see smoke, smell burning, or the vehicle has been flooded or in a collision, stop, move away from the vehicle and contact emergency services or roadside assistance.
  • Have the vehicle diagnosed by a technician trained and equipped for high-voltage work. Clearing the code does not fix the underlying cause.

What P0AA6 means

  • Hybrid and electric vehicles keep the high-voltage system electrically separate from the metal body. An isolation monitor measures the resistance between the two.
  • P0AA6 is set when that resistance falls below the threshold the manufacturer has programmed. The threshold, test conditions and any extra sub-codes are set by the manufacturer.

Which vehicles it applies to

  • P0AA6 is a generic OBD-II code (it starts with P0), so the code name is standardised across manufacturers that use it.
  • How the fault is detected, what the vehicle does when it is set, and the repair procedure all differ by manufacturer, model and year.
  • Ford publishes dealer training material on diagnosing P0AA6 on its electrified vehicles. Owners and repair shops also report it on hybrids from other makers. We have not confirmed which specific models or years use it.

Possible causes

  • Moisture or coolant reaching high-voltage parts or connectors
  • Damaged insulation on a high-voltage cable or connector
  • An internal fault in a high-voltage component, such as the battery pack, inverter, drive motor, electric air-conditioning compressor, heater or charger
  • A fault in the isolation monitoring circuit itself

These are the categories of cause described in technical material. They are not ranked. Only a proper insulation test following the manufacturer procedure shows where the fault is.

Repair cost

  • We do not publish a cost estimate for this code. The cost depends on which high-voltage component is at fault, which only a proper diagnosis can show.

Get a free diagnosis for your vehicle

Tell ElectraMedic your make, model and symptoms and get guidance on what P0AA6 could mean for your car.

Start free diagnosis

Already have a repair quote?

If a garage has diagnosed an isolation fault and given you a quote, Repair Clarity can explain the proposed work and suggest questions to ask before you agree to pay. $29.99 USD one-off.

Sources and review

Last reviewed 14 November 2026. Checked against the SAE code definition and manufacturer training material. Not yet reviewed by an independent high-voltage technician.

General information only, not a diagnosis of your vehicle. Always follow your manufacturer's guidance.

Free Weekly EV Brief

One email each Monday with everything an EV owner needs to know.

Tip of the weekCommon issue + fixLatest recall alertsCommunity fixesLink to full diagnosis

No spam. Unsubscribe anytime.

Built with for EV owners by EV enthusiasts

Join Our EV Owners Community
PrivacyAboutContact
AI EV diagnosis guidance
Private vehicle records
Secure Stripe checkout

© 2026 ElectraMedic. All rights reserved.